D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
proc
/
self
/
root
/
usr
/
bin
/
Filename :
kdumpctl
back
Copy
#!/bin/bash KEXEC=/sbin/kexec KDUMP_KERNELVER="" KDUMP_COMMANDLINE="" KEXEC_ARGS="" KDUMP_CONFIG_FILE="/etc/kdump.conf" MKDUMPRD="/sbin/mkdumprd -f" DRACUT_MODULES_FILE="/usr/lib/dracut/modules.txt" SAVE_PATH=/var/crash SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa" INITRD_CHECKSUM_LOCATION="/boot/.fadump_initrd_checksum" DUMP_TARGET="" DEFAULT_INITRD="" DEFAULT_INITRD_BAK="" TARGET_INITRD="" FADUMP_REGISTER_SYS_NODE="/sys/kernel/fadump_registered" #kdump shall be the default dump mode DEFAULT_DUMP_MODE="kdump" image_time=0 . /lib/kdump/kdump-lib.sh standard_kexec_args="-p" # Some default values in case /etc/sysconfig/kdump doesn't include KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug" if [ -f /etc/sysconfig/kdump ]; then . /etc/sysconfig/kdump fi single_instance_lock() { local rc timeout=5 exec 9>/var/lock/kdump if [ $? -ne 0 ]; then echo "Create file lock failed" exit 1 fi flock -n 9 rc=$? while [ $rc -ne 0 ]; do echo "Another app is currently holding the kdump lock; waiting for it to exit..." flock -w $timeout 9 rc=$? done } determine_dump_mode() { # Check if firmware-assisted dump is enabled # if yes, set the dump mode as fadump if is_fadump_capable; then echo "Dump mode is fadump" DEFAULT_DUMP_MODE="fadump" fi } # remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>] # Remove a list of kernel parameters from a given kernel cmdline and print the result. # For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists. remove_cmdline_param() { local cmdline=$1 shift for arg in $@; do cmdline=`echo $cmdline | \ sed -e "s/\b$arg=[^ ]*//g" \ -e "s/^$arg\b//g" \ -e "s/[[:space:]]$arg\b//g" \ -e "s/\s\+/ /g"` done echo $cmdline } # # This function returns the "apicid" of the boot # cpu (cpu 0) if present. # get_bootcpu_apicid() { awk ' \ BEGIN { CPU = "-1"; } \ $1=="processor" && $2==":" { CPU = $NF; } \ CPU=="0" && /^apicid/ { print $NF; } \ ' \ /proc/cpuinfo } # # This function appends argument "$2=$3" to string ($1) if not already present. # append_cmdline() { local cmdline=$1 local newstr=${cmdline/$2/""} # unchanged str implies argument wasn't there if [ "$cmdline" == "$newstr" ]; then cmdline="${cmdline} ${2}=${3}" fi echo $cmdline } # This function performs a series of edits on the command line. # Store the final result in global $KDUMP_COMMANDLINE. prepare_cmdline() { local cmdline id if [ -z "$KDUMP_COMMANDLINE" ]; then cmdline=$(cat /proc/cmdline) else cmdline=${KDUMP_COMMANDLINE} fi # These params should always be removed cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn) # These params can be removed configurably cmdline=$(remove_cmdline_param "$cmdline" ${KDUMP_COMMANDLINE_REMOVE}) # Always remove "root=X", as we now explicitly generate all kinds # of dump target mount information including root fs. # # We do this before KDUMP_COMMANDLINE_APPEND, if one really cares # about it(e.g. for debug purpose), then can pass "root=X" using # KDUMP_COMMANDLINE_APPEND. cmdline=$(remove_cmdline_param "$cmdline" root) # With the help of "--hostonly-cmdline", we can avoid some interitage. cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe) # Remove netroot, rd.iscsi.initiator and iscsi_initiator since # we get duplicate entries for the same in case iscsi code adds # it as well. cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator) cmdline="${cmdline} ${KDUMP_COMMANDLINE_APPEND}" id=$(get_bootcpu_apicid) if [ ! -z ${id} ] ; then cmdline=$(append_cmdline "${cmdline}" disable_cpu_apicid ${id}) fi if has_hpwdt; then cmdline="${cmdline} rd.driver.pre=hpwdt" fi KDUMP_COMMANDLINE=$cmdline } save_core() { coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`" mkdir -p $coredir cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete if [ $? == 0 ]; then mv $coredir/vmcore-incomplete $coredir/vmcore echo "saved a vmcore to $coredir" else echo "failed to save a vmcore to $coredir" >&2 fi # pass the dmesg to Abrt tool if exists, in order # to collect the kernel oops message. # https://fedorahosted.org/abrt/ if [ -x /usr/bin/dumpoops ]; then makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg >/dev/null 2>&1 dumpoops -d $coredir/dmesg >/dev/null 2>&1 if [ $? == 0 ]; then echo "kernel oops has been collected by abrt tool" fi fi } rebuild_fadump_initrd() { local target_initrd_tmp # this file tells the initrd is fadump enabled touch /tmp/fadump.initramfs target_initrd_tmp="$TARGET_INITRD.tmp" $MKDUMPRD $target_initrd_tmp --rebuild $DEFAULT_INITRD_BAK --kver $kdump_kver \ -i /tmp/fadump.initramfs /etc/fadump.initramfs if [ $? != 0 ]; then echo "mkdumprd: failed to rebuild initrd with fadump support" >&2 rm -f /tmp/fadump.initramfs return 1 fi rm -f /tmp/fadump.initramfs # updating fadump initrd mv $target_initrd_tmp $TARGET_INITRD sync return 0 } rebuild_kdump_initrd() { $MKDUMPRD $TARGET_INITRD $kdump_kver if [ $? != 0 ]; then echo "mkdumprd: failed to make kdump initrd" >&2 return 1 fi return 0 } rebuild_initrd() { if [[ ! -w "$KDUMP_BOOTDIR" ]];then echo "$KDUMP_BOOTDIR does not have write permission. Can not rebuild $TARGET_INITRD" return 1 fi if [ $DEFAULT_DUMP_MODE == "fadump" ]; then rebuild_fadump_initrd else rebuild_kdump_initrd fi return $? } #$1: the files to be checked with IFS=' ' check_exist() { for file in $1; do if [ ! -f "$file" ]; then echo -n "Error: $file not found."; echo return 1 fi done } #$1: the files to be checked with IFS=' ' check_executable() { for file in $1; do if [ ! -x "$file" ]; then echo -n "Error: $file is not executable."; echo return 1 fi done } backup_default_initrd() { if [ ! -f "$DEFAULT_INITRD" ]; then return fi if [ ! -e $DEFAULT_INITRD_BAK ]; then echo "Backing up $DEFAULT_INITRD before rebuild." # save checksum to verify before restoring sha1sum $DEFAULT_INITRD > $INITRD_CHECKSUM_LOCATION cp $DEFAULT_INITRD $DEFAULT_INITRD_BAK if [ $? -ne 0 ]; then echo "WARNING: failed to backup $DEFAULT_INITRD." rm -f $DEFAULT_INITRD_BAK fi fi } restore_default_initrd() { # If a backup initrd exists, we must be switching back from # fadump to kdump. Restore the original default initrd. if [ -f $DEFAULT_INITRD_BAK ] && [ -f $INITRD_CHECKSUM_LOCATION ]; then # verify checksum before restoring backup_checksum=`sha1sum $DEFAULT_INITRD_BAK | awk '{ print $1 }'` default_checksum=`cat $INITRD_CHECKSUM_LOCATION | awk '{ print $1 }'` if [ "$default_checksum" != "$backup_checksum" ]; then echo "WARNING: checksum mismatch! Can't restore original initrd.." else rm -f $INITRD_CHECKSUM_LOCATION mv $DEFAULT_INITRD_BAK $DEFAULT_INITRD if [[ $? -eq 0 ]]; then echo -n "Restoring original initrd as fadump mode " echo "is disabled." sync fi fi fi } check_config() { local nr nr=$(awk 'BEGIN{cnt=0} /^raw|^ssh[[:blank:]]|^nfs|^ext[234]|^xfs|^btrfs|^minix|^dracut_args .*\-\-mount/{cnt++} END{print cnt}' $KDUMP_CONFIG_FILE) [ $nr -gt 1 ] && { echo "More than one dump targets specified." return 1 } nr=$(grep "^dracut_args .*\-\-mount" $KDUMP_CONFIG_FILE | grep -o "\-\-mount" | wc -l) [ $nr -gt 1 ] && { echo "Multiple mount targets specified in one \"dracut_args\"." return 1 } # Check if we have any leading spaces (or tabs) before the # variable name in the kdump conf file if grep -E -q '^[[:blank:]]+[a-z]' $KDUMP_CONFIG_FILE; then echo "No whitespaces are allowed before a kdump option name in $KDUMP_CONFIG_FILE" return 1 fi while read config_opt config_val; do case "$config_opt" in \#* | "") ;; raw|ext2|ext3|ext4|minix|btrfs|xfs|nfs|ssh|sshkey|path|core_collector|kdump_post|kdump_pre|extra_bins|extra_modules|default|force_rebuild|force_no_rebuild|dracut_args|fence_kdump_args|fence_kdump_nodes) # remove inline comments after the end of a directive. [ -z "$config_val" ] && { echo "Invalid kdump config value for option $config_opt." return 1; } ;; net|options|link_delay|disk_timeout|debug_mem_level|blacklist) echo "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives." return 1 ;; *) echo "Invalid kdump config option $config_opt" return 1; ;; esac done <<< "$(read_strip_comments $KDUMP_CONFIG_FILE)" check_default_config || return 1 check_fence_kdump_config || return 1 return 0 } # get_pcs_cluster_modified_files <image timestamp> # return list of modified file for fence_kdump modified in Pacemaker cluster get_pcs_cluster_modified_files() { local time_stamp local modified_files is_generic_fence_kdump && return 1 is_pcs_fence_kdump || return 1 time_stamp=`pcs cluster cib | xmllint --xpath 'string(/cib/@cib-last-written)' - | \ xargs -0 date +%s --date` if [ -n $time_stamp -a $time_stamp -gt $image_time ]; then modified_files="cluster-cib" fi if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then time_stamp=`stat -c "%Y" $FENCE_KDUMP_CONFIG_FILE` if [ "$time_stamp" -gt "$image_time" ]; then modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE" fi fi echo $modified_files } check_boot_dir() { #If user specify a boot dir for kdump kernel, let's use it. Otherwise #check whether it's a atomic host. If yes parse the subdirectory under #/boot; If not just find it under /boot. [ -n "$KDUMP_BOOTDIR" ] && return if ! is_atomic || [ "$(uname -m)" = "s390x" ]; then KDUMP_BOOTDIR="/boot" else eval $(cat /proc/cmdline| grep "BOOT_IMAGE" | cut -d' ' -f1) KDUMP_BOOTDIR="/boot"$(dirname $BOOT_IMAGE) fi } setup_initrd() { check_boot_dir if [ -z "$KDUMP_KERNELVER" ]; then kdump_kver=`uname -r` else kdump_kver=$KDUMP_KERNELVER fi kdump_kernel="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}" DEFAULT_INITRD="${KDUMP_BOOTDIR}/initramfs-`uname -r`.img" DEFAULT_INITRD_BAK="${KDUMP_BOOTDIR}/.initramfs-`uname -r`.img.default" if [ $DEFAULT_DUMP_MODE == "fadump" ]; then TARGET_INITRD="$DEFAULT_INITRD" # backup initrd for reference before replacing it # with fadump aware initrd backup_default_initrd else TARGET_INITRD="${KDUMP_BOOTDIR}/initramfs-${kdump_kver}kdump.img" # check if a backup of default initrd exists. If yes, # it signifies a switch from fadump mode. So, restore # the backed up default initrd. restore_default_initrd fi } check_files_modified() { local modified_files="" #also rebuild when Pacemaker cluster conf is changed and fence kdump is enabled. modified_files=$(get_pcs_cluster_modified_files) EXTRA_BINS=`grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\ -f2` CHECK_FILES=`grep ^kdump_pre $KDUMP_CONFIG_FILE | cut -d\ -f2` CORE_COLLECTOR=`grep ^core_collector $KDUMP_CONFIG_FILE | cut -d\ -f2` CORE_COLLECTOR=`type -P $CORE_COLLECTOR` EXTRA_BINS="$EXTRA_BINS $CHECK_FILES" CHECK_FILES=`grep ^extra_bins $KDUMP_CONFIG_FILE | cut -d\ -f2-` EXTRA_BINS="$EXTRA_BINS $CHECK_FILES" files="$KDUMP_CONFIG_FILE $kdump_kernel $EXTRA_BINS $CORE_COLLECTOR" [[ -e /etc/fstab ]] && files="$files /etc/fstab" check_exist "$files" && check_executable "$EXTRA_BINS" [ $? -ne 0 ] && return 2 for file in $files; do time_stamp=`stat -c "%Y" $file` if [ "$time_stamp" -gt "$image_time" ]; then modified_files="$modified_files $file" fi done if [ -n "$modified_files" ]; then echo "Detected change(s) in the following file(s):" echo -n " "; echo "$modified_files" | sed 's/\s/\n /g' return 1 fi return 0 } check_dump_fs_modified() { local _old_dev _old_mntpoint _old_fstype local _new_dev _new_mntpoint _new_fstype local _target _path _dracut_args local _target_drivers _module_name local _old_drivers="$(lsinitrd $TARGET_INITRD -f /usr/lib/dracut/loaded-kernel-modules.txt | tr '\n' ' ')" # No need to check in case of mount target specified via "dracut_args". if is_mount_in_dracut_args; then return 0 fi # No need to check in case of raw target. # Currently we do not check also if ssh/nfs target is specified if is_ssh_dump_target || is_nfs_dump_target || is_raw_dump_target; then return 0 fi _target=$(get_user_configured_dump_disk) if [[ -n "$_target" ]]; then _target=$(to_dev_name $_target) _new_fstype=$(blkid $_target | awk -F"TYPE=" '{print $2}' | cut -d '"' -f 2) else _path=$(get_save_path) set -- $(df -T $_path 2>/dev/null | tail -1 | awk '{ print $1, $2}') _target=$(to_dev_name $1) _new_fstype=$2 if [[ -z "$_target" || -z "$_new_fstype" ]];then echo "Dump path $_path does not exist" return 2 fi fi _record_block_drivers() { local _drivers if [[ -b /dev/block/$1 ]]; then _drivers=$(udevadm info -a "/dev/block/$1" | sed -n 's/\s*DRIVERS=="\(\S\+\)"/\1/p') fi if [[ -b $1 ]]; then _drivers=$(udevadm info -a "$1" | sed -n 's/\s*DRIVERS=="\(\S\+\)"/\1/p') fi for _driver in $_drivers; do if ! [[ " $_target_drivers " == *" $_driver "* ]]; then _target_drivers="$_target_drivers $_driver" fi done return 1 } check_block_and_slaves_all _record_block_drivers "$(get_maj_min "$_target")" for _driver in $_target_drivers; do # Older version of kmod util doesn't give module name, so follow Kbuild's # name-fix rule and deduce the name. _module_name=$(echo "$_driver" | sed "s/\(,\|-\)/_/g") # Target is mounted already, if module is not included by current kernel, # could be a deprecated/invalid driver name or builtin module if ! (grep -q "\b$_module_name\b" /proc/modules); then continue fi if ! [[ " $_old_drivers " == *" $_module_name "* ]]; then echo "Detected change in block device driver, $_module_name is not included" return 1 fi done if [[ $(expr substr $_new_fstype 1 3) = "nfs" ]];then _new_dev=$_target else _new_dev=$(kdump_get_persistent_dev $_target $_new_fstype) fi if ! findmnt $_target >/dev/null; then echo "Dump target $_target is probably not mounted." return 2 fi if [[ "$_target" = "$(get_root_fs_device)" ]]; then _new_mntpoint="/sysroot" else _new_mntpoint="/kdumproot/$(get_mntpoint_from_target $_target)" fi _dracut_args=$(lsinitrd $TARGET_INITRD -f usr/lib/dracut/build-parameter.txt) if [[ -z "$_dracut_args" ]];then echo "Warning: No dracut arguments found in initrd" return 0 fi # if --mount argument present then match old and new target, mount # point and file system. If any of them mismatches then rebuild echo $_dracut_args | grep "\-\-mount" &> /dev/null if [[ $? -eq 0 ]];then set -- $(echo $_dracut_args | awk -F "--mount '" '{print $2}' | cut -d' ' -f1,2,3) _old_dev=$1 _old_mntpoint=$2 _old_fstype=$3 [[ $_new_dev = $_old_dev && $_new_mntpoint = $_old_mntpoint && $_new_fstype = $_old_fstype ]] && return 0 # otherwise rebuild if target device is not a root device else [[ "$_target" = "$(get_root_fs_device)" ]] && return 0 fi echo "Detected change in File System" return 1 } check_wdt_modified() { local -A _drivers local _alldrivers _active _wdtdrv _wdtppath _dir local wd_old wd_new is_wdt_mod_omitted [[ $? -eq 0 ]] && return 0 [[ -d /sys/class/watchdog/ ]] || return 0 # Copied logic from dracut 04watchdog/module-setup.sh::installkernel() for _dir in /sys/class/watchdog/*; do [[ -d "$_dir" ]] || continue [[ -f "$_dir/state" ]] || continue _active=$(< "$_dir/state") [[ "$_active" = "active" ]] || continue # device/modalias will return driver of this device _wdtdrv=$(< "$_dir/device/modalias") # There can be more than one module represented by same # modalias. Currently load all of them. # TODO: Need to find a way to avoid any unwanted module # represented by modalias _wdtdrv=$(modprobe --set-version "$kdump_kver" -R $_wdtdrv 2>/dev/null) if [[ $_wdtdrv ]]; then for i in $_wdtdrv; do _drivers[$i]=1 done fi # however in some cases, we also need to check that if there is # a specific driver for the parent bus/device. In such cases # we also need to enable driver for parent bus/device. _wdtppath=$(readlink -f "$_dir/device") while [[ -d "$_wdtppath" ]] && [[ "$_wdtppath" != "/sys" ]]; do _wdtppath=$(readlink -f "$_wdtppath/..") [[ -f "$_wdtppath/modalias" ]] || continue _wdtdrv=$(< "$_wdtppath/modalias") _wdtdrv=$(modprobe --set-version "$kdump_kver" -R $_wdtdrv 2>/dev/null) if [[ $_wdtdrv ]]; then for i in $_wdtdrv; do _drivers[$i]=1 done fi done done # ensure that watchdog module is loaded as early as possible _alldrivers="${!_drivers[*]}" [[ $_alldrivers ]] && wd_new="rd.driver.pre=${_alldrivers// /,}" wd_old=$(lsinitrd $TARGET_INITRD -f etc/cmdline.d/00-watchdog.conf) [[ "$wd_old" = "$wd_new" ]] && return 0 return 1 } # returns 0 if system is not modified # returns 1 if system is modified # returns 2 if system modification is invalid check_system_modified() { local ret [[ -f $TARGET_INITRD ]] || return 1 check_files_modified ret=$? if [ $ret -ne 0 ]; then return $ret fi check_dump_fs_modified ret=$? if [ $ret -ne 0 ]; then return $ret fi check_wdt_modified if [ $? -ne 0 ]; then echo "Detected change in watchdog state" return 1 fi return 0 } check_rebuild() { local extra_modules local capture_capable_initrd="1" local _force_rebuild force_rebuild="0" local _force_no_rebuild force_no_rebuild="0" local ret system_modified="0" setup_initrd if [ $? -ne 0 ]; then return 1 fi _force_no_rebuild=`grep ^force_no_rebuild $KDUMP_CONFIG_FILE 2>/dev/null` if [ $? -eq 0 ]; then force_no_rebuild=`echo $_force_no_rebuild | cut -d' ' -f2` if [ "$force_no_rebuild" != "0" ] && [ "$force_no_rebuild" != "1" ];then echo "Error: force_no_rebuild value is invalid" return 1 fi fi _force_rebuild=`grep ^force_rebuild $KDUMP_CONFIG_FILE 2>/dev/null` if [ $? -eq 0 ]; then force_rebuild=`echo $_force_rebuild | cut -d' ' -f2` if [ "$force_rebuild" != "0" ] && [ "$force_rebuild" != "1" ];then echo "Error: force_rebuild value is invalid" return 1 fi fi if [[ "$force_no_rebuild" == "1" && "$force_rebuild" == "1" ]]; then echo "Error: force_rebuild and force_no_rebuild are enabled simultaneously in kdump.conf" return 1 fi # Will not rebuild kdump initrd if [ "$force_no_rebuild" == "1" ]; then return 0 fi #will rebuild every time if extra_modules are specified extra_modules=`grep ^extra_modules $KDUMP_CONFIG_FILE` [ -n "$extra_modules" ] && force_rebuild="1" #check to see if dependent files has been modified #since last build of the image file if [ -f $TARGET_INITRD ]; then image_time=`stat -c "%Y" $TARGET_INITRD 2>/dev/null` #in case of fadump mode, check whether the default/target #initrd is already built with dump capture capability if [ "$DEFAULT_DUMP_MODE" == "fadump" ]; then capture_capable_initrd=$(lsinitrd -f $DRACUT_MODULES_FILE $TARGET_INITRD | grep ^kdumpbase$ | wc -l) fi fi check_system_modified ret=$? if [ $ret -eq 2 ]; then return 1 elif [ $ret -eq 1 ];then system_modified="1" fi if [ $image_time -eq 0 ]; then echo -n "No kdump initial ramdisk found."; echo elif [ "$capture_capable_initrd" == "0" ]; then echo -n "Rebuild $TARGET_INITRD with dump capture support"; echo elif [ "$force_rebuild" != "0" ]; then echo -n "Force rebuild $TARGET_INITRD"; echo elif [ "$system_modified" != "0" ]; then : else return 0 fi echo "Rebuilding $TARGET_INITRD" rebuild_initrd return $? } # This function check iomem and determines if we have more than # 4GB of ram available. Returns 1 if we do, 0 if we dont need_64bit_headers() { return `tail -n 1 /proc/iomem | awk '{ split ($1, r, "-"); \ print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'` } # Load the kdump kernel specified in /etc/sysconfig/kdump # If none is specified, try to load a kdump kernel with the same version # as the currently running kernel. load_kdump() { ARCH=`uname -m` if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ] then need_64bit_headers if [ $? == 1 ] then FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf32-core-headers` if [ -n "$FOUND_ELF_ARGS" ] then echo -n "Warning: elf32-core-headers overrides correct elf64 setting" echo else KEXEC_ARGS="$KEXEC_ARGS --elf64-core-headers" fi else FOUND_ELF_ARGS=`echo $KEXEC_ARGS | grep elf64-core-headers` if [ -z "$FOUND_ELF_ARGS" ] then KEXEC_ARGS="$KEXEC_ARGS --elf32-core-headers" fi fi fi prepare_cmdline # For secureboot enabled machines, use new kexec file based syscall. # Old syscall will always fail as it does not have capability to # to kernel signature verification. if is_secure_boot_enforced; then echo "Secure Boot is enabled. Using kexec file based syscall." KEXEC_ARGS="$KEXEC_ARGS -s" elif is_secure_mode_enforced; then echo "securelevel is set to 1 (Secure Mode). Using kexec file based syscall." KEXEC_ARGS="$KEXEC_ARGS -s" fi $KEXEC $KEXEC_ARGS $standard_kexec_args \ --command-line="$KDUMP_COMMANDLINE" \ --initrd=$TARGET_INITRD $kdump_kernel if [ $? == 0 ]; then echo "kexec: loaded kdump kernel" return 0 else echo "kexec: failed to load kdump kernel" >&2 return 1 fi } check_ssh_config() { while read config_opt config_val; do case "$config_opt" in sshkey) # remove inline comments after the end of a directive. if [ -f "$config_val" ]; then # canonicalize the path SSH_KEY_LOCATION=$(/usr/bin/readlink -m $config_val) else echo "WARNING: '$config_val' doesn't exist, using default value '$SSH_KEY_LOCATION'" fi ;; path) SAVE_PATH=$config_val ;; ssh) DUMP_TARGET=$config_val ;; *) ;; esac done <<< "$(read_strip_comments $KDUMP_CONFIG_FILE)" #make sure they've configured kdump.conf for ssh dumps local SSH_TARGET=`echo -n $DUMP_TARGET | sed -n '/.*@/p'` if [ -z "$SSH_TARGET" ]; then return 1 fi return 0 } # ipv6 host address may takes a long time to be ready. # Instead of checking against ipv6 address, we just check the network reachable # by the return val of 'ssh' check_and_wait_network_ready() { local start_time=$(date +%s) local warn_once=1 local cur local diff local retval local errmsg while true; do errmsg=$(ssh -i $SSH_KEY_LOCATION -o BatchMode=yes $DUMP_TARGET mkdir -p $SAVE_PATH 2>&1) retval=$? # ssh exits with the exit status of the remote command or with 255 if an error occurred if [ $retval -eq 0 ]; then return 0 elif [ $retval -ne 255 ]; then echo "Could not create $DUMP_TARGET:$SAVE_PATH, you should check the privilege on server side" >&2 return 1 fi # if server removes the authorized_keys or, no /root/.ssh/kdump_id_rsa echo $errmsg | grep -q "Permission denied\|No such file or directory\|Host key verification failed" if [ $? -eq 0 ]; then echo "Could not create $DUMP_TARGET:$SAVE_PATH, you probably need to run \"kdumpctl propagate\"" >&2 return 1 fi if [ $warn_once -eq 1 ]; then echo "Network dump target is not usable, waiting for it to be ready" warn_once=0 fi echo -n . cur=$(date +%s) let "diff = $cur - $start_time" # 60s time out if [ $diff -gt 180 ]; then break; fi sleep 1 done echo "Could not create $DUMP_TARGET:$SAVE_PATH, ipaddr is not ready yet. You should check network connection" >&2 return 1 } check_ssh_target() { check_and_wait_network_ready if [ $? -ne 0 ]; then return 1 fi return 0 } propagate_ssh_key() { check_ssh_config if [ $? -ne 0 ]; then echo "No ssh config specified in $KDUMP_CONFIG_FILE. Can't propagate" >&2 exit 1 fi local KEYFILE=$SSH_KEY_LOCATION local errmsg="Failed to propagate ssh key" #Check to see if we already created key, if not, create it. if [ -f $KEYFILE ]; then echo "Using existing keys..." else echo -n "Generating new ssh keys... " /usr/bin/ssh-keygen -t rsa -f $KEYFILE -N "" 2>&1 > /dev/null echo "done." fi #now find the target ssh user and server to contact. SSH_USER=`echo $DUMP_TARGET | cut -d\ -f2 | cut -d@ -f1` SSH_SERVER=`echo $DUMP_TARGET | sed -e's/\(.*@\)\(.*$\)/\2/'` #now send the found key to the found server ssh-copy-id -i $KEYFILE $SSH_USER@$SSH_SERVER RET=$? if [ $RET == 0 ]; then echo $KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER return 0 else echo $errmsg, $KEYFILE failed in transfer to $SSH_SERVER >&2 exit 1 fi } show_reserved_mem() { local mem=$(cat /sys/kernel/kexec_crash_size) local mem_mb=$(expr $mem / 1024 / 1024) echo "Reserved "$mem_mb"MB memory for crash kernel" } check_current_fadump_status() { # Check if firmware-assisted dump has been registered. rc=`cat $FADUMP_REGISTER_SYS_NODE` [ $rc -eq 1 ] && return 0 return 1 } check_current_kdump_status() { rc=`cat /sys/kernel/kexec_crash_loaded` if [ $rc == 1 ]; then return 0 else return 1 fi } check_current_status() { if [ $DEFAULT_DUMP_MODE == "fadump" ]; then check_current_fadump_status else check_current_kdump_status fi return $? } save_raw() { local kdump_dir local raw_target raw_target=$(awk '$1 ~ /^raw$/ { print $2; }' $KDUMP_CONFIG_FILE) [ -z "$raw_target" ] && return 0 [ -b "$raw_target" ] || { echo "raw partition $raw_target not found" return 1 } kdump_dir=`grep ^path $KDUMP_CONFIG_FILE | cut -d' ' -f2-` if [ -z "${kdump_dir}" ]; then coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`" else coredir="${kdump_dir}/`date +"%Y-%m-%d-%H:%M"`" fi mkdir -p "$coredir" [ -d "$coredir" ] || { echo "failed to create $coredir" return 1 } if makedumpfile -R $coredir/vmcore <$raw_target >/dev/null 2>&1; then # dump found echo "Dump saved to $coredir/vmcore" # wipe makedumpfile header dd if=/dev/zero of=$raw_target bs=1b count=1 2>/dev/null else rm -rf "$coredir" fi return 0 } is_dump_target_configured() { local _target _target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw|^ssh|^nfs" /etc/kdump.conf) [ -n "$_target" ] } local_fs_dump_target() { local _target _target=$(egrep "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf) if [ $? -eq 0 ]; then echo $_target|awk '{print $2}' fi } path_to_be_relabeled() { local _path _target _mnt="/" _rmnt if is_dump_target_configured; then _target=$(local_fs_dump_target) if [[ -n "$_target" ]]; then _mnt=$(findmnt -k -f -n -r -o TARGET $_target) if [ -z "$_mnt" ]; then return fi else return fi fi if is_mount_in_dracut_args; then return; fi _path=$(get_save_path) # if $_path is masked by other mount, we will not relabel it. _rmnt=$(df $_mnt/$_path 2>/dev/null | tail -1 | awk '{ print $NF }') if [ "$_rmnt" == "$_mnt" ]; then echo $_mnt/$_path fi } selinux_relabel() { local _path _i _attr _path=$(path_to_be_relabeled) if [ -z "$_path" ] || ! [ -d "$_path" ] ; then return fi for _i in $(find $_path); do _attr=$(getfattr -m "security.selinux" $_i 2>/dev/null) if [ -z "$_attr" ]; then restorecon $_i; fi done } # Check if secure boot is being enforced. # # Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and # SetupMode-$(the UUID), they are both 5 bytes binary data. The first four # bytes are the attributes associated with the variable and can safely be # ignored, the last bytes are one-byte true-or-false variables. If SecureBoot # is 1 and SetupMode is 0, then secure boot is being enforced. # # SecureBoot-UUID won't always be set when securelevel is 1. For legacy-mode # and uefi-without-seucre-enabled system, we can manually enable secure mode # by writing "1" to securelevel. So check both efi var and secure mode is a # more sane way. # # Assume efivars is mounted at /sys/firmware/efi/efivars. is_secure_boot_enforced() { local secure_boot_file setup_mode_file local secure_boot_byte setup_mode_byte secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null) setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null) if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file|cut -d' ' -f 5) setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file|cut -d' ' -f 5) if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then return 0 fi fi return 1 } # Check if secure mode is being enforced (securelevel =? 1) is_secure_mode_enforced() { local secure_mode_byte if [ ! -f /sys/kernel/security/securelevel ]; then return 1 fi secure_mode_byte=$(cat /sys/kernel/security/securelevel) if [ "$secure_mode_byte" = "1" ]; then return 0 fi return 1 } check_crash_mem_reserved() { local mem_reserved mem_reserved=$(cat /sys/kernel/kexec_crash_size) if [ $mem_reserved -eq 0 ]; then echo "No memory reserved for crash kernel" return 1 fi return 0 } check_kdump_feasibility() { if [ ! -e /sys/kernel/kexec_crash_loaded ]; then echo "Kdump is not supported on this kernel" return 1 fi check_crash_mem_reserved return $? } check_fence_kdump_config() { local hostname=`hostname` local ipaddrs=`hostname -I` local nodes=$(get_option_value "fence_kdump_nodes") for node in $nodes; do if [ "$node" = "$hostname" ]; then echo "Option fence_kdump_nodes cannot contain $hostname" return 1 fi # node can be ipaddr echo "$ipaddrs " | grep "$node " > /dev/null if [ $? -eq 0 ]; then echo "Option fence_kdump_nodes cannot contain $node" return 1 fi done return 0 } check_dump_feasibility() { if [ $DEFAULT_DUMP_MODE == "fadump" ]; then return 0 fi check_kdump_feasibility return $? } start_fadump() { echo 1 > $FADUMP_REGISTER_SYS_NODE if ! check_current_fadump_status; then echo "fadump: failed to register" return 1 fi echo "fadump: registered successfully" return 0 } start_dump() { if [ $DEFAULT_DUMP_MODE == "fadump" ]; then start_fadump else load_kdump fi return $? } check_default_config() { local default_option default_option=$(awk '$1 ~ /^default$/ {print $2;}' $KDUMP_CONFIG_FILE) if [ -z "$default_option" ]; then return 0 else case "$default_option" in reboot|halt|poweroff|shell|dump_to_rootfs) return 0 ;; *) echo $"Usage kdump.conf: default {reboot|halt|poweroff|shell|dump_to_rootfs}" return 1 esac fi } start() { check_dump_feasibility if [ $? -ne 0 ]; then echo "Starting kdump: [FAILED]" return 1 fi check_config if [ $? -ne 0 ]; then echo "Starting kdump: [FAILED]" return 1 fi if sestatus 2>/dev/null | grep -q "SELinux status.*enabled"; then selinux_relabel fi save_raw if [ $? -ne 0 ]; then echo "Starting kdump: [FAILED]" return 1 fi check_current_status if [ $? == 0 ]; then echo "Kdump already running: [WARNING]" return 0 fi if check_ssh_config; then if ! check_ssh_target; then echo "Starting kdump: [FAILED]" return 1 fi fi check_rebuild if [ $? != 0 ]; then echo "Starting kdump: [FAILED]" return 1 fi start_dump if [ $? != 0 ]; then echo "Starting kdump: [FAILED]" return 1 fi echo "Starting kdump: [OK]" } reload() { check_current_status if [ $? -ne 0 ]; then echo "Kdump is not running: [WARNING]" return 0 fi if [ $DEFAULT_DUMP_MODE == "fadump" ]; then reload_fadump return $? else stop_kdump fi if [ $? -ne 0 ]; then echo "Stopping kdump: [FAILED]" return 1 fi echo "Stopping kdump: [OK]" setup_initrd if [ $? -ne 0 ]; then echo "Starting kdump: [FAILED]" return 1 fi start_dump if [ $? -ne 0 ]; then echo "Starting kdump: [FAILED]" return 1 fi echo "Starting kdump: [OK]" } stop_fadump() { echo 0 > $FADUMP_REGISTER_SYS_NODE if check_current_fadump_status; then echo "fadump: failed to unregister" return 1 fi echo "fadump: unregistered successfully" return 0 } stop_kdump() { if is_secure_boot_enforced; then $KEXEC -s -p -u else $KEXEC -p -u fi if [ $? != 0 ]; then echo "kexec: failed to unload kdump kernel" return 1 fi echo "kexec: unloaded kdump kernel" return 0 } reload_fadump() { echo 1 > $FADUMP_REGISTER_SYS_NODE if [ $? == 0 ]; then echo "fadump: re-registered successfully" return 0 else # FADump could fail on older kernel where re-register # support is not enabled. Try stop/start from userspace # to handle such scenario. stop_fadump if [ $? == 0 ]; then start_fadump return $? fi fi return 1 } stop() { if [ $DEFAULT_DUMP_MODE == "fadump" ]; then stop_fadump else stop_kdump fi if [ $? != 0 ]; then echo "Stopping kdump: [FAILED]" return 1 fi echo "Stopping kdump: [OK]" return 0 } rebuild() { check_config if [ $? -ne 0 ]; then return 1 fi if check_ssh_config; then if ! check_ssh_target; then return 1 fi fi setup_initrd if [ $? -ne 0 ]; then return 1 fi echo "Rebuilding $TARGET_INITRD" rebuild_initrd return $? } if [ ! -f "$KDUMP_CONFIG_FILE" ]; then echo "Error: No kdump config file found!" >&2 exit 1 fi main () { # Determine if the dump mode is kdump or fadump determine_dump_mode case "$1" in start) if [ -s /proc/vmcore ]; then save_core reboot else start fi ;; stop) stop ;; status) EXIT_CODE=0 check_current_status case "$?" in 0) echo "Kdump is operational" EXIT_CODE=0 ;; 1) echo "Kdump is not operational" EXIT_CODE=3 ;; esac exit $EXIT_CODE ;; reload) reload ;; restart) stop start ;; rebuild) rebuild ;; condrestart) ;; propagate) propagate_ssh_key ;; showmem) show_reserved_mem ;; *) echo $"Usage: $0 {start|stop|status|restart|reload|rebuild|propagate|showmem}" exit 1 esac } # Other kdumpctl instances will block in queue, until this one exits single_instance_lock # To avoid fd 9 leaking, we invoke a subshell, close fd 9 and call main. # So that fd isn't leaking when main is invoking a subshell. (exec 9<&-; main $1) exit $?