D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
sbin
/
Filename :
new-kernel-pkg
back
Copy
#!/bin/bash # # new-kernel-pkg # Invoked upon installation or removal of a kernel package, the following # tasks are/can be done here: # creation/removal of initrd # run of depmod/removal of depmod generated files # addition/removal of kernel images from grub/lilo configuration (via grubby) # # Copyright 2002-2008 Red Hat, Inc. All rights reserved. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # PATH=/sbin:/bin:$PATH lilo=/sbin/lilo # some defaults that are sane for most arches kernelName=vmlinuz if [ -x ./grubby ]; then grubby=./grubby else grubby=/sbin/grubby fi [ -f /etc/sysconfig/kernel ] && . /etc/sysconfig/kernel [ -f /etc/sysconfig/uboot ] && . /etc/sysconfig/uboot cfgGrub2="" cfgGrub2Efi="" cfgGrub="" cfgLilo="" cfgExtlinux="" cfguBoot="" runLilo="" grubConfig="" grub2Config="" grub2EfiConfig="" extlinuxConfig="" ubootScript="/boot/boot.scr" ARCH=$(uname -m) if [ $ARCH = 'ia64' ]; then liloConfig=/boot/efi/EFI/redhat/elilo.conf bootPrefix=/boot/efi/EFI/redhat liloFlag=elilo isx86="" elif [ $ARCH = 'ppc64' -o $ARCH = 'ppc' ]; then liloConfig=/etc/yaboot.conf grub2Config=$(readlink -f /etc/grub2.cfg 2>/dev/null) bootPrefix=/boot lilo=/sbin/ybin liloFlag=yaboot runLilo="yes" isx86="" elif [ $ARCH = 'sparc' -o $ARCH = 'sparc64' ]; then liloConfig=/etc/silo.conf bootPrefix=/boot liloFlag=silo lilo=/sbin/silo isx86="" elif [ $ARCH = 's390' -o $ARCH = 's390x' ]; then liloConfig=/etc/zipl.conf bootPrefix=/boot liloFlag=zipl lilo=/sbin/zipl runLilo="yes" isx86="" elif [[ ${ARCH} =~ armv[5|7].*l ]] ; then liloConfig="" bootPrefix=/boot extlinuxConfig=$(readlink -f /etc/extlinux.conf 2>/dev/null) ubootDir=${UBOOT_DIR:-"/boot"} ubootScript=$ubootDir/${UBOOT_SCR:-"boot.scr"} ubootKList=${UBOOT_KLIST:-"klist.txt"} ubootDevice=/dev/${UBOOT_DEVICE:-"mmcblk0p1"} ubootDefaultImage=${UBOOT_UIMAGE:-"uImage"} ubootDefaultInitrd=${UBOOT_UINITRD:-"uInitrd"} ubootAddress=${UBOOT_IMGADDR:-"0x00008000"} mounted="" liloFlag="" isx86="" else # this leaves i?86 and x86_64 liloConfig=/etc/lilo.conf grubConfig=$(readlink -f /etc/grub.conf 2>/dev/null) grub2Config=$(readlink -f /etc/grub2.cfg 2>/dev/null) grub2EfiConfig=$(readlink -f /etc/grub2-efi.cfg 2>/dev/null) extlinuxConfig=$(readlink -f /etc/extlinux.conf 2>/dev/null) bootPrefix=/boot liloFlag=lilo isx86="yes" fi mode="" version="" initrd="" dracut="" dracuthostonly="" initrdfile="" devtreefile="" moddep="" verbose="" makedefault="" package="" mbkernel="$HYPERVISOR" mbargs="$HYPERVISOR_ARGS" adddracutargs="" addplymouthinitrd="" DEBUGARG="systemd.log_level=debug systemd.log_target=kmsg" usage() { echo "Usage: `basename $0` [-v] [--mkinitrd] [--rminitrd] [--dracut]" >&2 echo " [--initrdfile=<initrd-image>] [--depmod] [--rmmoddep]" >&2 echo " [--kernel-args=<args>] [--remove-args=<args>]" >&2 echo " [--banner=<banner>] [--multiboot=multiboot]" >&2 echo " [--mbargs=mbargs] [--make-default] [--add-dracut-args]" >&2 echo " [--add-plymouth-initrd]" >&2 echo " [--host-only] [--devtree=<devicetree.dtb>]" >&2 echo " <--install | --remove | --update | --rpmposttrans> <kernel-version>" >&2 echo " (ex: `basename $0` --mkinitrd --depmod --install 2.4.7-2)" >&2 exit 1 } rungrubby() { if [ "$1" == "--debug" ]; then [ "$MAKEDEBUG" != "yes" ] && return 0 [ -n "$verbose" ] && echo "- First, making a debug entry." if [ $ARCH = 's390' -o $ARCH = 's390x' ]; then declare -x debugtitle="_with_debugging" else declare -x debugtitle=" with debugging" fi declare -x debugargs="$DEBUGARG" shift else [ -n "$verbose" ] && echo "- Making a normal entry." fi $(eval $grubby $@) export -n debugargs export -n debugtitle unset debugargs unset debugtitle } set_title() { if [ -n "$banner" ]; then if [ $ARCH = 's390' -o $ARCH = 's390x' ]; then title=$(echo $banner | sed 's/ /_/g') else title="$banner ($version)" fi elif [ $ARCH = 's390' -o $ARCH = 's390x' ]; then title=$(echo $version | sed 's/ /_/g') elif [ -f /etc/os-release ]; then . /etc/os-release title="$NAME ($version) $VERSION" elif [ -f /etc/redhat-release ]; then title="$(sed 's/ release.*$//' < /etc/redhat-release) ($version)" else title="Red Hat Linux ($version)" fi } install() { # XXX kernel should be able to be specified also (or work right on ia64) if [ ! -f $kernelImage ] ; then [ -n "$verbose" ] && echo "kernel for $version does not exist, not running grubby" return fi INITRD="" if [ -f $initrdfile ]; then [ -n "$verbose" ] && echo "found $initrdfile and using it with grubby" INITRD="--initrd $initrdfile" if [ -n "$addplymouthinitrd" ]; then INITRD="$INITRD --extra-initrd $bootPrefix/initrd-plymouth.img" fi fi DEVTREE="" if [ "x$devtreefile" != "x" -a -f "$devtreefile" ]; then [ -n "$verbose" ] && echo "found $devtreefile and using it with grubby" DEVTREE="--devtree $devtreefile" fi # FIXME: is this a good heuristic to find out if we're on iSeries? if [ -d /proc/iSeries ]; then [ -n "$verbose" ] && echo "On an iSeries, just making img file" if [ -z $initrdfile ]; then [ -n "$verbose" ] && echo "No initrd, just adding system map" /sbin/addSystemMap $bootPrefix/System.map-$version $kernelImage $bootPrefix/vmlinitrd-$version else /sbin/addSystemMap $bootPrefix/System.map-$version $kernelImage $bootPrefix/vmlinux.sm-$version /sbin/addRamDisk $initrdfile $bootPrefix/System.map-$version $bootPrefix/vmlinux.sm-$version $bootPrefix/vmlinitrd-$version 2>/dev/null rm $bootPrefix/vmlinux.sm-$version fi return fi # get the root filesystem to use rootdevice=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $1; }}' /etc/fstab 2>/dev/null) if [ "$rootdevice" = "" ]; then rootdevice=`grep -o -P "(?<=root=)\S+" /proc/cmdline` fi if [ -n "$mbkernel" -a -n "$cfgLilo" -a "$liloFlag" != "elilo" ]; then [ -n "$verbose" ] && echo "multiboot specified, not updating lilo.conf" cfgLilo="" fi set_title if [ -n "$cfgGrub" ]; then [ -n "$verbose" ] && echo "adding $version to $grubConfig" ARGS="--grub -c $grubConfig --add-kernel=$kernelImage $INITRD \ ${mbkernel:+--add-multiboot=\"$mbkernel\"} \ ${mbargs:+--mbargs=\"$mbargs\"} \ --title=\"$title\$debugtitle\" --copy-default \ --args=\"root=$rootdevice $kernargs \$debugargs\" \ --remove-kernel=\"TITLE=$title\$debugtitle\"" rungrubby ${ARGS} $makedefault rungrubby --debug ${ARGS} --set-index=1 else [ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby for grub 0.97" fi if [ -n "$cfgGrub2" ]; then [ -n "$verbose" ] && echo "adding $version to $grub2Config" ARGS="--grub2 -c $grub2Config --add-kernel=$kernelImage $INITRD \ --copy-default --title \"$title\$debugtitle\" \ ${mbkernel:+--add-multiboot=\"$mbkernel\"} \ ${mbargs:+--mbargs=\"$mbargs\"} \ --args=\"root=$rootdevice $kernargs \$debugargs\" \ --remove-kernel=\"TITLE=$title\$debugtitle\"" rungrubby ${ARGS} $makedefault rungrubby --debug ${ARGS} --set-index=1 else [ -n "$verbose" ] && echo "$grub2Config does not exist, not running grubby for grub 2" fi if [ -n "$cfgGrub2Efi" ]; then [ -n "$verbose" ] && echo "adding $version to $grub2EfiConfig" ARGS="--grub2 -c $grub2EfiConfig --efi \ --add-kernel=$kernelImage $DEVTREE $INITRD \ --copy-default --title \"$title\$debugtitle\" \ ${mbkernel:+--add-multiboot=\"$mbkernel\"} \ ${mbargs:+--mbargs=\"$mbargs\"} \ --args=\"root=$rootdevice $kernargs \$debugargs\" \ --remove-kernel=\"TITLE=$title\$debugtitle\"" rungrubby ${ARGS} $makedefault rungrubby --debug ${ARGS} --set-index=1 else [ -n "$verbose" ] && echo "$grub2EfiConfig does not exist, not running grubby for grub 2 with UEFI" fi if [ -n "$cfgLilo" ]; then [ -n "$verbose" ] && echo "adding $version to $liloConfig" ARGS="--$liloFlag --add-kernel=$kernelImage $INITRD \ --copy-default --title \"$title\$debugtitle\" \ ${mbkernel:+--add-multiboot=\"$mbkernel\"} \ ${mbargs:+--mbargs=\"$mbargs\"} \ --args=\"root=$rootdevice $kernargs \$debugargs\" \ --remove-kernel=\"TITLE=$version\"" rungrubby ${ARGS} $makedefault rungrubby --debug ${ARGS} --set-index=1 if [ -n "$runLilo" ]; then [ -n "$verbose" ] && echo "running $lilo" if [ ! -x $lilo ] ; then [ -n "$verbose" ] && echo "$lilo does not exist" else $lilo > /dev/null fi fi else [ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby" fi if [ -n "$cfgExtlinux" ]; then [ -n "$verbose" ] && echo "adding $version to $extlinuxConfig" ARGS="--extlinux -c $extlinuxConfig --add-kernel=$kernelImage \ $INITRD --copy-default --title \"$title\$debugtitle\" \ ${mbkernel:+--add-multiboot=\"$mbkernel\"} \ ${mbargs:+--mbargs=\"$mbargs\"} \ --args=\"root=$rootdevice $kernargs \$debugargs\" \ --remove-kernel=\"TITLE=$title\$debugtitle\"" rungrubby ${ARGS} $makedefault rungrubby --debug ${ARGS} --set-index=1 else [ -n "$verbose" ] && echo "$extlinuxConfig does not exist, not running grubby for extlinux" fi } rpmposttrans() { local files local f files="/etc/kernel/postinst.d/*[^~] /etc/kernel/postinst.d/$version/*[^~]" for f in $files ; do [ -f $f ] && [ -x $f ] || continue $f $version $kernelImage done } remove() { # FIXME: is this a good heuristic to find out if we're on iSeries? if [ -d /proc/iSeries ]; then [ -n "$verbose" ] && echo "On an iSeries, remove img file" rm -f $kernelImage.img 2>/dev/null return fi local files local f files="/etc/kernel/prerm.d/*[^~] /etc/kernel/prerm.d/$version/*[^~]" for f in $files ; do [ -f $f ] && [ -x $f ] || continue $f $version $kernelImage done if [ -n "$cfgGrub" ]; then [ -n "$verbose" ] && echo "removing $version from $grubConfig" $grubby --grub -c $grubConfig \ --remove-kernel=$kernelImage else [ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby for grub 0.97" fi if [ -n "$cfgGrub2" ]; then [ -n "$verbose" ] && echo "removing $version from $grub2Config" $grubby --grub2 -c $grub2Config \ --remove-kernel=$kernelImage else [ -n "$verbose" ] && echo "$grub2Config does not exist, not running grubby for grub 2" fi if [ -n "$cfgGrub2Efi" ]; then [ -n "$verbose" ] && echo "removing $version from $grub2EfiConfig" $grubby --grub2 -c $grub2EfiConfig --efi \ --remove-kernel=$kernelImage else [ -n "$verbose" ] && echo "$grub2EfiConfig does not exist, not running grubby grub 2 with UEFI" fi if [ -n "$cfgLilo" ]; then [ -n "$verbose" ] && echo "removing $version from $liloConfig" $grubby --remove-kernel=$kernelImage \ --$liloFlag if [ -n "$runLilo" ]; then [ -n "$verbose" ] && echo "running $lilo" if [ ! -x $lilo ] ; then [ -n "$verbose" ] && echo "$lilo does not exist" else $lilo > /dev/null fi fi else [ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby" fi if [ -n "$cfguBoot" ]; then [ -n "$verbose" ] && echo "removing $version from $ubootDir..." if [ -f $ubootDir/$ubootKList ]; then tmpKList=`mktemp $ubootDir/$ubootKList.XXXX` curversion=`tail -n1 $ubootDir/$ubootKList` sed "/$version$/d" $ubootDir/$ubootKList > $tmpKList newversion=`tail -n1 $tmpKList` if [ -f $ubootDir/uImage-$newversion ] && [ -f $ubootDir/uInitrd-$newversion ]; then if [ "$curversion" != "$newversion" ]; then cp -fp $ubootDir/uImage-$newversion $ubootDir/${ubootDefaultImage} if [ $? -ne 0 ]; then [ -n "$verbose" ] && echo "copy uImage-$newversion error, default kernel not replaced!" && exit fi cp -fp $ubootDir/uInitrd-$newversion $ubootDir/${ubootDefaultInitrd} if [ $? -ne 0 ]; then [ -n "$verbose" ] && echo "copy uInitrd-$newversion error, default Initrd not replaced!" && exit fi fi [ -n "$verbose" ] && echo "removing uImage-$version" if [ -f $ubootDir/uImage-$version ]; then rm -f $ubootDir/uImage-$version else [ -n "$verbose" ] && echo "uImage-$version did not exist!" fi [ -n "$verbose" ] && echo "removing uInitrd-$version" if [ -f $ubootDir/uInitrd-$version ]; then rm -f $ubootDir/uInitrd-$version else [ -n "$verbose" ] && echo "uInitrd-$version did not exist!" fi mv $tmpKList $ubootDir/$ubootKList [ -x /sbin/a-b-c ] && /sbin/a-b-c else [ -n "$verbose" ] && echo "uImage $newversion does not exist!" [ -f $tmpKList ] && rm -f $tmpKList fi else [ -n "$verbose" ] && echo "No previous kernel version. U-Boot images not removed!" fi else [ -n "$verbose" ] && echo "$ubootScript does not exist, not modifying $ubootDir" fi if [ -n "$cfgExtlinux" ]; then [ -n "$verbose" ] && echo "removing $version from $extlinuxConfig" $grubby --extlinux -c $extlinuxConfig \ --remove-kernel=$kernelImage else [ -n "$verbose" ] && echo "$extlinuxConfig does not exist, not running grubby for extlinux" fi } update() { if [ ! -f $kernelImage ] ; then [ -n "$verbose" ] && echo "kernel for $version does not exist, not running grubby" return fi set_title INITRD="" if [ -f $initrdfile ]; then [ -n "$verbose" ] && echo "found $initrdfile and using it with grubby" INITRD="--initrd $initrdfile" if [ -n "$addplymouthinitrd" ]; then INITRD="$INITRD --extra-initrd $bootPrefix/initrd-plymouth.img" fi fi if [ -n "$cfgGrub" ]; then [ -n "$verbose" ] && echo "updating $version from $grubConfig" ARGS="--grub -c $grubConfig --update-kernel=$kernelImage $INITRD \ ${kernargs:+--args=\"$kernargs\"} \ ${removeargs:+--remove-args=\"$removeargs\"} \ ${mbkernel:+--add-multiboot=\"$mbkernel\"} \ --title=\"$title\$debugtitle\"" rungrubby ${ARGS} rungrubby --debug ${ARGS} else [ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby" fi if [ -n "$cfgGrub2" ]; then [ -n "$verbose" ] && echo "updating $version from $grub2Config" ARGS="--grub2 -c $grub2Config --update-kernel=$kernelImage $INITRD \ ${kernargs:+--args=\"$kernargs\"} \ ${removeargs:+--remove-args=\"$removeargs\"} \ --title=\"$title\$debugtitle\"" rungrubby ${ARGS} rungrubby --debug ${ARGS} else [ -n "$verbose" ] && echo "$grub2Config does not exist, not running grubby" fi if [ -n "$cfgGrub2Efi" ]; then [ -n "$verbose" ] && echo "updating $version from $grub2EfiConfig" ARGS="--grub2 -c $grub2EfiConfig --efi --update-kernel=$kernelImage \ $INITRD ${kernargs:+--args=\"$kernargs\"} \ ${removeargs:+--remove-args=\"$removeargs\"} \ --title=\"$title\$debugtitle\"" rungrubby ${ARGS} rungrubby --debug ${ARGS} else [ -n "$verbose" ] && echo "$grub2EfiConfig does not exist, not running grubby" fi if [ -n "$cfgLilo" ]; then [ -n "$verbose" ] && echo "updating $version from $liloConfig" ARGS="--$liloFlag --update-kernel=$kernelImage $INITRD \ ${kernargs:+--args=\"$kernargs\"} \ ${removeargs:+--remove-args=\"$removeargs\"} \ --title=\"$title\$debugtitle\"" rungrubby ${ARGS} rungrubby --debug ${ARGS} if [ -n "$runLilo" ]; then [ -n "$verbose" ] && echo "running $lilo" if [ ! -x $lilo ] ; then [ -n "$verbose" ] && echo "$lilo does not exist" else $lilo > /dev/null fi fi else [ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby" fi if [ -n "$cfguBoot" ]; then [ -n "$verbose" ] && echo "adding $version to $ubootDir..." [ -n "$verbose" ] && echo "creating uImage-$version" mkimage -A arm -O linux -T kernel -C none -a $ubootAddress \ -e $ubootAddress -n $version \ -d $kernelImage $ubootDir/uImage-$version [ -n "$verbose" ] && echo "creating uInitrd-$version" mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 \ -n initramfs -d $initrdfile $ubootDir/uInitrd-$version if [ -f $ubootDir/uImage-$version ] && [ -f $ubootDir/uInitrd-$version ]; then cp -fp $ubootDir/uImage-$version $ubootDir/${ubootDefaultImage} if [ $? -ne 0 ]; then [ -n "$verbose" ] && echo "copy uImage-$version error, kernel not installed!" && exit fi cp -fp $ubootDir/uInitrd-$version $ubootDir/${ubootDefaultInitrd} if [ $? -ne 0 ]; then [ -n "$verbose" ] && echo "copy uInitrd-$version error, kernel not installed!" && exit fi echo $version >> $ubootDir/$ubootKList [ -x /sbin/a-b-c ] && /sbin/a-b-c else [ -n "$verbose" ] && echo "cannot make $version the default" fi else [ -n "$verbose" ] && echo "$ubootScript does not exist, not setting up $ubootDir" fi if [ -n "$cfgExtlinux" ]; then [ -n "$verbose" ] && echo "updating $version from $extlinuxConfig" ARGS="--extlinux -c $extlinuxConfig --update-kernel=$kernelImage \ $INITRD ${kernargs:+--args=\"$kernargs\"} \ ${removeargs:+--remove-args=\"$removeargs\"} \ --title=\"$title\$debugtitle\"" rungrubby ${ARGS} rungrubby --debug ${ARGS} else [ -n "$verbose" ] && echo "$extlinuxConfig does not exist, not running grubby" fi } doMkinitrd() { if [ -n "$dracut" ]; then tool="dracut $dracuthostonly -f $initrdfile $version" else tool="mkinitrd --allow-missing -f $initrdfile $version" fi [ -n "$verbose" ] && echo "creating initrd: $tool" $tool rc=$? if [ $rc != 0 ]; then echo "mkinitrd failed" >&2 exit 1 fi } rminitrd() { [ -n "$verbose" ] && echo "removing initrd $initrdfile" [ -f $initrdfile ] && rm -f $initrdfile } doDepmod() { [ -n "$verbose" ] && echo "running depmod for $version" depmod -ae -F /boot/System.map-$version $version } doRmmoddep() { [ -n "$verbose" ] && echo "removing modules.dep info for $version" if [ -d /lib/modules/$version ]; then rm -f /lib/modules/$version/modules.*.bin \ /lib/modules/$version/modules.{alias,dep,devname,symbols,softdep} fi } # kernel image for 2.4 is vmlinux if [ $ARCH = 'ppc64' -o $ARCH = 'ppc' ]; then if [ "$kernelmajor" == "2.4" ]; then kernelName=vmlinux fi fi while [ $# -gt 0 ]; do case $1 in --mkinitrd) initrd="make" ;; --rminitrd) initrd="remove" ;; --devtree*) if [[ $1 == --devtree\=* ]]; then devtreefile=${1#--devtreefile=} else devtreefile=$2 shift fi ;; --dracut) dracut=--dracut ;; --host-only) dracuthostonly=-H ;; --initrdfile*) if [[ $1 == --initrdfile\=* ]]; then initrdfile=${1#--initrdfile=} else initrdfile=$2 shift fi ;; --kernel-args*) if [[ $1 == --kernel-args\=* ]]; then kernargs=${1#--kernel-args=} else kernargs=$2 shift fi ;; --remove-args*) if [[ $1 == --remove-args\=* ]]; then removeargs=${1#--remove-args=} else removeargs=$2 shift fi ;; --banner*) if [[ $1 == --banner\=* ]]; then banner=${1#--banner=} else banner=$2 shift fi ;; --multiboot*) if [[ $1 == --multiboot\=* ]]; then mbkernel=${1#--multiboot=} else # can't really support having an optional second arg here # sorry! mbkernel="/boot/xen.gz" fi ;; --mbargs*) if [[ $1 == --mbargs\=* ]]; then mbargs=${1#--mbargs=} else mbargs="$2" shift fi ;; --depmod) moddep="make" ;; --rmmoddep) moddep="remove" ;; --make-default) makedefault="--make-default" ;; --package*) if [[ $1 == --package\=* ]]; then package=${1#--package=} else package=$2 shift fi ;; --add-dracut-args) adddracutargs=--add-dracut-args ;; --add-plymouth-initrd) addplymouthinitrd=--add-plymouth-initrd ;; --kernel-image*) if [[ $1 == --kernel-image\=* ]]; then kernelImage=${1#--kernel-image=} else kernelImage="$2" shift fi if ! [[ -f $kernelImage ]]; then echo "Can't find kernel image '$kernelImage'" >&2 usage exit 1 fi ;; --kernel-name*) if [[ $1 == --kernel-name\=* ]]; then kernelName=${1#--kernel-name=} else kernelName="$2" shift fi ;; -v) verbose=-v ;; *) if [ -z "$mode" ]; then mode=$1 elif [ -z "$version" ]; then version=$1 else usage fi ;; esac shift done # make sure the mode is valid if [ "$mode" != "--install" -a "$mode" != "--remove" -a "$mode" != "--update" -a "$mode" != "--rpmposttrans" ] ; then usage fi if [ -z "$version" ]; then usage fi if [ "$mode" != "--install" -a "$makedefault" ]; then usage fi kernelmajor=`echo $kernel | cut -d . -f 1,2` [[ $kernelImage ]] || kernelImage="$bootPrefix/$kernelName-$version" # set the initrd file based on arch; ia64 is the only currently known oddball if [ -z "$initrdfile" ]; then INITRD_NAME_PREFIX="initrd" if [ -n "$dracut" ]; then INITRD_NAME_PREFIX="initramfs" fi if [ `uname -m` = "ia64" ]; then initrdfile="/boot/efi/EFI/redhat/$INITRD_NAME_PREFIX-$version.img" else initrdfile="/boot/$INITRD_NAME_PREFIX-$version.img" fi fi [ -n "$verbose" ] && echo "initrdfile is $initrdfile" # add dracut i18n, keyboard and plymouth kernel args if requested if [ -n "$dracut" -o -n "$adddracutargs" ]; then if [ -r /etc/vconsole.conf ]; then . /etc/vconsole.conf elif [ -r /etc/sysconfig/keyboard ]; then . /etc/sysconfig/keyboard fi if [ -r /etc/locale.conf ]; then . /etc/locale.conf elif [ -r /etc/sysconfig/i18n ]; then . /etc/sysconfig/i18n fi for i in SYSFONT SYSFONTACM UNIMAP LANG KEYTABLE; do val=$(eval echo \$$i) [ -n "$val" ] && kernargs="$kernargs $i=$val" done if [ -n "$KEYBOARDTYPE" -a "$KEYBOARDTYPE" != "pc" ]; then kernargs="$kernargs KEYBOARDTYPE=$KEYBOARDTYPE" fi fi # set this as the default if we have the package and it matches if [ "$mode" == "--install" -a "$UPDATEDEFAULT" == "yes" -a -n "$package" -a -n "$DEFAULTKERNEL" -a "$package" == "$DEFAULTKERNEL" ]; then makedefault="--make-default" [ -n "$verbose" ] && echo "making it the default based on config" fi if [ "$moddep" == "make" ]; then doDepmod elif [ "$moddep" == "remove" ]; then doRmmoddep fi if [ "$initrd" == "make" ]; then doMkinitrd elif [ "$initrd" == "remove" ]; then rminitrd fi if [ ! -x $grubby ] ; then [ -n "$verbose" ] && echo "$grubby does not exist" exit 0 fi [ -n "$grubConfig" ] && [ -f "$grubConfig" ] && cfgGrub=1; [ -n "$grub2Config" ] && [ -f "$grub2Config" ] && cfgGrub2=1; [ -n "$grub2EfiConfig" ] && [ -f "$grub2EfiConfig" ] && cfgGrub2Efi=1; [ -n "$liloConfig" ] && [ -f "$liloConfig" ] && cfgLilo=1; [ -n "$extlinuxConfig" ] && [ -f "$extlinuxConfig" ] && cfgExtlinux=1; # if we have a U-Boot directory, but no boot script, check if the directory # is mounted. If not, mount it, and then check if a boot script exists. if [ -n "$ubootDir" ]; then if [ -f "$ubootScript" ]; then cfguBoot=1 else mountEntry=`mount | grep $ubootDir` if [ -z "$mountEntry" ]; then mount $ubootDevice $ubootDir mounted=1 fi [ -f "$ubootScript" ] && cfguBoot=1; fi fi # if we're using U-Boot, check if the default load address should change if [ -n "$cfguBoot" -a -z "$UBOOT_IMGADDR" ]; then [[ $version =~ .([^.]*)$ ]] platform=${BASH_REMATCH[1]} # A few platforms use an alternate kernel load address if [ "$platform" = "omap" ]; then ubootAddress=0x80008000 elif [ "$platform" = "imx" ]; then ubootAddress=0x90008000 fi fi # if we have a lilo config on an x86 box, see if the default boot loader # is lilo to determine if it should be run if [ -n "$cfgLilo" -a -n "$isx86" ]; then runLilo=$($grubby --bootloader-probe | grep lilo) fi if [ "$mode" == "--install" ]; then install elif [ "$mode" == "--remove" ]; then remove elif [ "$mode" == "--update" ]; then update elif [ "$mode" == "--rpmposttrans" ]; then rpmposttrans fi # if we mounted the U-Boot directory, unmount it. [ -n "$mounted" ] && umount $ubootDir # make sure changes make it to the disk. # if /boot is a mountpoint, force the meta data on disk # to by-pass writeback delay. # PPC64LE-only to deal with Petitboot issues if [ "$ARCH" = "ppc64le" ]; then sync && mountpoint -q /boot &&fsfreeze -f /boot && fsfreeze -u /boot fi exit 0